Yug Coat Premium Grade Wall Primer (Water Thinnable) / Cement Primer gives superior adhesive and better performance of the paint film.

It is aqueous polyvinyl acetate dispersion with cross linking properties and stabilization with polyvinyl alcohol.

Area of App.
Interior Plasters, Asbestos sheets, Masonry
Application Viscosity
20 – 22 sec.
Recommended Thinner
Potable Water
Method of App.
Brush / Roller
Drying Time
Surface drying time maximum 1 hour
Re-Coating Period
3 to 4 hours
Smooth and Matt
1 coat – 120-140 sq.ft/ltr.
(*Performance may vary due to factors such as method and condition of application, porosity and surface roughness.)

Easy Application

Superior Finish

Better Value for Money

Enhanced Durability

Step 1 – Cleaning : Preparing the surface by sanding with Emery paper 180. Wipe clean.

Step 2 – Primer : Yug Coat Premium Grade Wall Primer – Water Thinnable / Cement Primer is to be thinned with water in the ratio 1:1 by volume to obtain brushing consistency.  Apply a single coat and allow to dry for 3 to 4 hours.

Step 3 – Putty : (Optional) Smoothen surface by filling dents with thin coats of Yug Coat Acrylic Wall Putty.  Allow drying for 6 to 8 hours. Sand with Emery paper 180 and wipe clean.

Step 4 – Primer : If putty has been used, apply a coat of printer to avoid a patchy appearance. Allow it to dry for 3 to 4 hours. Sand with Emery Paper 320. Wipe clean.

20 ltr / 4 ltr / 1 ltr


Note :This information is based on our present state of knowledge and is intended to provide general notes on our product and their usage, which we believe but no guaranty and no warranty of any kind is made with respect there to.